2024-11-12
Lockheed Martin Missiles and Fire Control (MFC) has approved PNC Inc for the Printed Circuit Assembly process and manufacturing.
2024-11-01
Ravin Sangani, Production Manager of PNC, PCB Division, successfully completed the course of study on IPC-6012 Certified IPC Trainer
2024-10-31
PNC purchased the PVA Delta 8 Conformal Coating Machine
2024-10-31
Please join us at Nashville, Booth 120, TN Design 2 Part show, Nov 19 and 20, Free registration
2024-09-30
PNC Inc. was awarded DBE certificate from the Port Authority of NY NJ
2024-03-05
PNC Inc. was awarded MBE certificate from the State of NJ
2023-12-19
PNC Inc. invests in Lauffer 4-Opening Multilayer Vacuum Press System, LOW PROFILE Model RMV125-4
2023-10-19
PNC Inc. Invests in second MIRTEC 3D AOI System
2023-09-11
PNC Inc. invests in DIS Optical Lay-up Station Model: OLS-M
2023-06-01
PNC Inc. Invests in APT-1600FD • TAKAYA APT-1600FD DUAL-SIDED FLYING PROBE TEST SYSTEM
2022-05-18
PNC Inc. invests in fully automated plating lines with copper via filling capability from IPS
2021-08-13
PNC Inc.invests in JUKI RS-1R Smart Mounter fully Automated Pick and Place, this would be our 3td SMT line.
2020-11-17
PNC Inc. invests in Pre and Post cleaning lines for HAL from IPS
2020-02-13
PNC Inc. invests in two PCB Drillers - EVO L and EVO 2S from Pluritec
2019-12-20
PNC Inc. invests in VCP 5000-1 with vacuum for Blind via filling & double sided filling capability.
2019-11-12
2019-11-04
PNC Inc. Invests in Limata's X100 Laser Direct Imager System
2017-09-01
PNC Inc. awarded ISO 9001 : 2015 Certificate
2017-06-22
PNC Inc. Invests in LED Laser Direct Imaging system from Miva Technologies
2017-02-22
PNC Augments Assembly Capability with CyberOptics Solder Paste Inspection
2017-01-12
PNC purchased two JUKI SMT machines KE-3020VXL & KE-3010XL
2016-12-01
PNC purchased a 1913 Mark III Series SMT Reflow Oven from Heller Industries.
2016-07-18
PNC Inc. Purchases GA 75 VSD FF from Atlas Copco
2016-07-14
PNC Inc. Announces New Sales Representatives, KT Tehnical Sales on the West Coast
2016-06-06
PNC Inc. has improved its manufacturing capabilities with the recent purchase of an ECOSELECT 2 Selective wave solder machine manufactured by Ersa.
2016-05-27
PNC's First Even Open House was a Great Success for Vendors, Industry Guests
2016-04-28
PNC Boosts Assembly Capabilities with New Electronic Cleaning System
2016-04-05
PNC to hold Open House on May 20th, 2016, Opportunity to meet with Customers and Vendors to discuss the future of the global PCB market.
2015-12-31
PNC Purchased Bench-top AOI / Company Continues to buy Products of the future
2015-12-07
PNC Boosts quality with purchase of Real Time X-ray Inspection System from Glen-brook Technologies
2015-09-21
Please be our guest at the region's largest Design & Contract. Manufacturing show on Sept. 30th and October 1st @ Royal Plaza Trade Center,181 Boston Post Rd W, Marlborough, MA 01752 Activate your Free VIP Registration here
2015-09-14
Please be our guest at the region's largest Design & Contract Manufacturing show on 9/16 and 9/17 @ Monroeville Convention Centre, 209& Mall Blvd. Monroeville, PA. Activate your Free VIP Registration here.
2014-12-29
2014-12-11
2014-11-03
PNC INC. Is A Newly Certified Member of the NY/NJ Minority Supplier Development Council
2014-09-16
PNC INC. Achieves Minority Business Enterprise Certification
2014-09-10
Please join PNC INC for upcoming Design 2 Part show, your VIP invitation the largest Design and contract manufacturing show in the region, Oct 1-2, Royal Plaza Trade Centre, Marlborough, MA , Free registration
2014-05-28
Please join PNC INC for upcoming SMTA Midwest Expo and Tech forum, June 18th, 2014 at DoubleTree Bloomington Minneapolis South 7800 Normandale Blvd. Bloomington, MN 55439, Free registration
2014-02-25
PNC INC. purchased Vacuum Packaging systems from CII.
2014-02-05
PNC Purchased new Horizontal conveyorized CobraBond /In-Line Oxide Replacement line from IPS.
2014-01-08
PNC Purchased ATG A5 NEO Flying probe Fixtureless Test-System with 8 test heads.
2014-01-01
PNC Purchased Uitron MR1-24 Camera system with brightfield/Darkfrield Metallograph. This system will be used to analyze our cross sections and coupons
2013-09-18
PNC Purchased XRI-369 X-Rite Diazo B/W transmission Densitometer.
2013-08-30
PNC INC. is participating in Design Part 2 / Job Shop shows in PA and MA. Please visit us at booth # 346 on Sept. 25 & 26, Phoenixville, PA and at booth # 537 on Oct. 30 & 31, Marlborough, MA.
2013-03-13
PNC Inc. is proud to announce its latest UL qualification of polyimide base materials. PNC has partnered with Ventec USA using VT-901 laminate and VT-901PP prepreg.
2013-03-13
PNC INC. has been added to Cooper Industries / Eaton Corporation AVL
2013-02-16
Join us at "Design part 2 / Job Shop Show", Monroeville, PA on April 17-18, 2013
2013-01-15
PNC Purchased primary developer from Schmid Systems Inc.
2012-06-21
PNC Purchased DP-1500 2X - V4 from Circuit Automation
2012-02-18
Join us at "Job Shop Show", SECAUCUS, NJ on April 11-12, 2012, Booth # 423
2012-01-27
PNC Purchased D32 Diazo Photo Tool Developer
2012-01-25
PNC Purchased ATG A1B Flying probe Fixtureless Test-System with 8 test heads
2012-01-18
PNC Purchased XRI-369 X-Rite Diazo B/W transmission Densitometer.
2012-01-18
Join us at "ATX-Automation Technology Expo", Convention Center, Philadelphia, PA May 22-24, 2012, Booth # 420
2012-01-15
PNC Purchased SCIENSCOPE inspection and measurement scope with Micro and Macro Zoom lenses with digital picture capability.
2012-01-10
PNC Purchased 547XL-30 Solder Stripper from ETI.
2012-01-07
PNC Purchased C-21-CC-50 Board Cleaning Machine with High Pressure Hole Clean from Integrated Process Systems.
2011-12-18
PNC Purchased Xli-30 Resist Strip System from Chemcut Corp, PA.
2011-11-20
PNC Purchased Chemcut 547XL-30 Solder Stripper.
2011-11-03
PNC Purchased GIGA8888,, 8 Spindles Drilling machine from Pluritec, Italy
2011-09-28
PNC Purchased ST300 Impedance Test System from ZMetrix.
2011-08-18
Join us at "Job Shop Show", Marlborough, MA on November 2-3rd, 2011, Booth # 538
2011-03-24
PNC Purchased POST ETCH PUNCH for Multilayer Registration with 4 Cameras from C. A. Picard International.
2011-03-22
PNC Purchased Accu-Score AS-100 MAX with jump scoring capability scoring machine from Accusystems Corp, PA.
2011-02-25
Join us at "Job Shop Show", Phoenixville, PA on April 13-14 th, 2011, Booth # 354
2011-02-25
Join us at "ATX-Automation Technology Expo", Jacob Javits Convention Center, New York, NY on JUNE 7-9th, 2011, Booth no 2926 FREE ADMISSION
2010-07-21
Join us at "Job Shop Show", Secaucus, NJ on SEPT 28-29th, 2010, Booth # 317
2010-06-18
Purchased new Hollmuller etcher from Germany.
2010-05-28
Purchased Excellon MK VI Driller/Router
2010-01-18
PNC inc. was awarded MIL-PRF-31032A AND MIL-PRF-55110 certifications from DSSC
2010-01-12
PNC installed New Legend Printer for direct silk screening from CAMTECH, Israel
2009-12-18
PNC installed New Film Plotter from Orbotech, Israel
2009-08-22
PNC installed New fully automatic Film Punch from Multiline Technology, NY, USA
2009-04-12
PNC installed New Mini Gold Tab Plating Machine Technique Inc
2009-04-12
Join us at ATX Expo Booth # 3328 ATX EXPO-Jacob Javits Convention Center, NY, NY
2008-06-21
PNC Inc. receives ITAR(International Traffic in Arms Regulations) Registration from the office of Defense Trade Controls Compliance, Compliance and registration Division(CRD). Registration Code: M23036
2008-06-08
PNC placed an order for semi-automatic Artwork film punch from Multiline Technology
2008-03-28
PNC installed new AOI machine Orin 860 from Camtel-Israel
2008-01-28
Implemented live order tracking on pnconline.com.
2008-01-08
PNC installed new Deburr machine Checmcut 605 with 500 PSI high pressure ringer and dryer.
2007-12-21
PNC completes our latest purchase of 3 Flying Probes from Mania Technology(1-Mania 580 and 2-MPP4504
2007-12-06
PNC completes our latest purchase of Costa Mesa, CA based PCB shop Prime Technology.
2007-09-08
Join us at Nepcon East trade show on OCT-30 and 31st, Booth NO. 967 at Boston Convention Center
2007-08-11
New RohS line for Tin finish was installed
2007-07-11
New RoHs line for Lead Free HOT Air Level installed.
2006-09-11
New RoHs line for Immersion Silver/GOLD and OSP surface finish was installed
2005-06-16
PNC installed new Flying probe electrical Testing machine Probe / Probot 880 from Mania Technologies
2002-08-12
SBA awarded Small Disadvantaged Business / Minority owned Business Certification, SBD Track # WA00001-0008667 EXP 04/16/2005
2002-08-02
New international sales and Marketing office opened in Schaumburg, Il.
2001-08-08
New CNC Router-4 Spindles from Wessels, Germany was successfully installed
2001-07-03
New CNC Driller-6 Spindles from Wessels, Germany was successfully installed.
2001-07-03
New CNC Driller-6 Spindles from Wessels, Germany was successfully installed
2001-05-03
Nepcon, PA Exhibition, Booth 404, at Ft. Washington, PA
2001-04-30
Placed an order for New CNC Driller-6 Spindles and CNC Routers-4 Spindles from Wessels, Germany
1998-12-01
PNC placed an order to buy it's second AOI from CAMTEK, Ltd. It will be installed in second week of January 1999
1998-08-15
PNC Installed its Conveyerised "Ultra-Plate" direct metallization line from Fidelity Chemicals